Unparalled Performance

Unparalled Performance

Range:80 - 180 km
(43 - 97 nm)
Endurance:6 hours
Dash speed:120 kts
Cruise speed:55 kts
MTO weight:200 kg (440 lbs)
Empty weight:110 kg (243 lbs)
Avionics/Redundancy

Avionics/Redundancy

Complete fail-safe systems

Dual Global Positioning System receiver and GLONASS receiver

Redundant Inertial Measurement Unit

Fully autonomous system from takeoff to landing

Intelligent Power Supply

Dimensions

Dimensions

Main Rotor Diameter:3400 mm
(133.9")
Length - Nose to Tail:3110 mm
(122")
Height: 1120 mm
(44")
Real Time video

Real Time video

In addition to the sensor imagery, the CAMCOPTER® S-100 provides a real-time video picture enabling the crew to see conflicting traffic or any obstacles that may be present.

Systems

Alternative content

Get Adobe Flash player

System

More Info

Performance

Max Airspeed (VNE): 130 kts (240 km/h) IAS
Typical Cruise Speed: 100 kts (185 km/h) IAS
Loiter Speed: 55 kts IAS (102 km/h) for maximum endurance
Endurance: >6 hours @ 55 kts @ 75 lbs (34 kg) payload
Service Ceiling: 18,000ft in ISA conditions @ reduced GW
Airframe Loading: Rated +3.5 g (7.7 lbs)  to  -1 g (-2.2 lbs)
Operating Temperature: -40°C to +55°C (-40°F to +131°F)
Wind (takeoff and landing): Up to 25 kts (46 km/h)


Technical

Main Rotor Diameter:3400 mm (134”)
Total Length:3110 mm (122”)
Total Height:1120 mm (44”)
Maximum T/O Weight:200 kg (440 lbs)
Empty Weight:110 kg (243 lbs)
Payload Capacity:50 kg (110 lbs)
Fuel (internal tanks):57 L (15.5 gal) equal 42 kg (92.5 lbs) AVGas 100 LL
Payload Electrical Power:500 W @ 28 V DC
Data Link Range:Up to 180 km (97 nm) available
camcopter in studio
camcopter in studio 3
camcopter in studio 4
camcopter in studio 5

Payload

Stabilized Day and Night Electro-Optical (EO) / Infra-Red (IR) Gimbals
Synthetic Aperture Radar (SAR)
Ground Penetrating Radar (GPSAR)

SIGINT & COMINT

Communications Relay
Transponder
Loudspeaker
Pamphlet, smoke or rope- / net-dropping containers
Underslung loads
Remotely Operated Video Enhanced Receiver (ROVER) compatible

Perfectly Configured

The CAMCOPTER® S-100 is a system beyond comparison. It not only provides the highest level of durability needed for both sea or land operations, but as a modular system it offers the ultimate in flexibility in order to meet the needs of a wide variety of missions – and at a far more affordable cost than alternative systems.

Versatility

Each one of our customers is unique, and to meet diverse and individual requirements the CAMCOPTER® S-100 has been designed to be fitted with a variety of payloads. It features platform and payload growth capabilities – with two payload bays, an auxiliary electronics bay, as well as two side payload hard points and the ability to carry underslung loads. Its typical capacity is 50 kg.

As standard, the CAMCOPTER® S-100 flies with state-of-the-art EO / IR sensors. Integrated spotlights, loudspeakers or Synthetic Aperture Radar (SAR) are also available.

payload close up 2
flying close up 2
payload close up 3
payload close up 4

Antenna

There are a number of antenna options available out to 200 km range.

Its primary C-band highly encrypted data link provides exceptional line-of-sight range.

Ground Control Station

The powerful multi-capable system software of the CAMCOPTER® S-100 is intuitively controlled through an easy-to-use operator interface.
To give operators immediate access to vital data, the ground control workstation displays the position of the UAV as well as status information in real time on a user-friendly, aviation-style instrument panel.

The Payload Ground Control allows the operator to control the payload while also having access to mission planning information, video-viewing, recording and frame capture.

The setup of the Ground Control Workstation itself is flexible depending on the user’s needs - so the CAMCOPTER® S-100 can be commanded from two laptop computers or integrated into a larger system; from a static setup (container), to moving (vehicle) to integrated (ship).

Network Capabilities

NETWORK-ENABLED

The Control Station (CS) system is network-enabled and with its Windows™ based architecture and Ethernet single cabling, it can be easily integrated, seamlessly passing information around the user community.

THE CUBE

The CUBE acts as a hub between the CAMCOPTER® S-100 and all ground components as well as higher-level networks. It is a compact, sealed module using military standard connectors and is entirely versatile, having been designed either for portable use or permanent installation on a vehicle or ship.

Its small footprint and network-ability allows it to be easily expanded to cover control of multiple UAV's from either a single shelter, a moving vehicle or from a ship's command and control center.

ISTAR CAPABILITY

The CAMCOPTER® S-100 has been designed as a highly efficient tool for extended situational awareness, either operating on its own or as part of a 
modern ISTAR (Intelligence, Surveillance, Target Acquisition and Reconnaissance) network, integrating all forces together in joint operations.

The CAMCOPTER® S-100’s modular design means the integration of different payloads is straightforward and the CS can easily be integrated into other systems, in 
various configurations – vital for linking up as part of an ISTAR network.

Communication between the CAMCOPTER® S-100 and the CS is set up via highly secure (encrypted) direct links that carry sensor, command and control data.

lorry
station interior
controller 1
Close